Guardians of The Lambsfoot!

Some lovely lambsfoots (lambsfeet? lambfoots? :eek:) in this thread! :thumbup:

Having had none until recently, I can now proudly say that (largely thanks to Jack's prodding) I now own two. An Arthur Wright in navy blue jigged bone (this one will accompany me to my alma mater in Atlanta, where our school colors are navy blue and old gold):





And because everything's better with a Barlow, I figured the same had to be true for a lambsfoot!





Two of Sheffield's Finest!

(Jack, I'll take a crack at dolling up that graphic when I get back and have a moment to sit down with a photo editor.)
 
Whenever I've seen these posted, I've paused to look at and admire them. Really interesting blade and handle profile. I don't usually go for single blade straight edges, but something about this pattern kept calling me - or maybe it was Jacks' subliminal influence :p

I ended up ordering one in ebony, and have enjoyed carrying it since it arrived. Strong pull, wonderfully thick ebony covers, very comfortable in the hand. Overall, a great knife!

20160623_173511.jpg


20160623_173539.jpg
 
I really do enjoy seeing the lambs foot knives, thank you all for the posts. Beautiful knives :thumbup:
 
Great thread by the OP.
I know realize the difference between a Sheeps foot & a Lambs foot if I'm correct. If not please educate me.
Thank you.
 
Great thread by the OP.
I know realize the difference between a Sheeps foot & a Lambs foot if I'm correct. If not please educate me.
Thank you.

You didn't complete your thought about the difference so I can't say if it is correct or not. A lambsfoot tapers.

I have a confession. I don't own a lambsfoot knife. I'm holding out for the right one, with stag covers, clean and flush joints, and fluted bolsters. Something like this, but with a lambsfoot blade.

Beautiful knife.
 
Great idea Jack. Nice knives everyone.

ablett009-3.jpg

THanks S-K, well it's a bit of fun :D Nice Ablett my friend :thumbsup:

Nice idea for a topic. I've been looking for a good example of the lambsfoot.

Using the noparse tag will display the code instead of the photo (so that others can cut and paste).

[URL=http://s1316.photobucket.com/user/jack-black1/media/jack-black1017/Guardians%20of%20The%20Lambsfoot%203_zpsavgilsyz.jpg.html][IMG]http://i1316.photobucket.com/albums/t610/jack-black1/jack-black1017/Guardians%20of%20The%20Lambsfoot%203_zpsavgilsyz.jpg[/IMG][/URL]

Thanks a lot Jake, I'll edit that into my previous post :) :thumbsup:

Haha! Great thread idea - I'm on mi phurn Jack but I'll add that to my sig later.

Here are my two, one from my father and one from yersel'




LOL! Very good Paul! :D Thanks my friend, it's always a treat to see your father's TEW :thumbsup:

Some lovely lambsfoots (lambsfeet? lambfoots? :eek:) in this thread! :thumbup:

Having had none until recently, I can now proudly say that (largely thanks to Jack's prodding) I now own two. An Arthur Wright in navy blue jigged bone (this one will accompany me to my alma mater in Atlanta, where our school colors are navy blue and old gold):





And because everything's better with a Barlow, I figured the same had to be true for a lambsfoot!





Two of Sheffield's Finest!

(Jack, I'll take a crack at dolling up that graphic when I get back and have a moment to sit down with a photo editor.)

Great stuff TB, and thanks :thumbup: Lambsfoot I reckon ;) You got a nice Arthur Wright there, and the IXL is a peach :thumbsup:

Whenever I've seen these posted, I've paused to look at and admire them. Really interesting blade and handle profile. I don't usually go for single blade straight edges, but something about this pattern kept calling me - or maybe it was Jacks' subliminal influence :p

I ended up ordering one in ebony, and have enjoyed carrying it since it arrived. Strong pull, wonderfully thick ebony covers, very comfortable in the hand. Overall, a great knife!

20160623_173511.jpg


20160623_173539.jpg

I know what you mean Mike, I generally like the addition of a pen, but I find the Lambsfoot blade so wonderfully versatile that the absence of one isn't missed two much. Of course some Lambsfoot knives do have a secondary pen :) That's a lovely knife :thumbsup:

Please accept the following as membership application to the "Guardians of The Lambsfoot". A pattern I hold in high esteem.





Jack, in your opinion does an Ancient TC Barlow qualify as proper lambsfoot?

You're in my friend, that is an absolute beauty :) May I ask the maker, unusual to see a bail? :thumbsup:

I guessed that question would come up at some point. When Charlie first told me about his idea for an Ancient Barlow, I spent a long time - months - and a lot of reading, trying to find a name for the blade. The best name I could find (I think) was a Short Beak, if I remember rightly. Charlie made a point of not running the edge parallel to the spine, like a true Lambsfoot, and so far as I know that blade shape pre-dates the Lambsfoot like the knives here. So MAYBE it was an early Lambsfoot. Personally, I think it probably had another name, and the Lambsfoot name was coined later, but it's definitely something to debate, and this would be a good place for that debate :thumbsup:

There's some good discussion about the Lambsfoot, and why it seems not to have travelled across the pond in this thread of Carl's here (hope I've got the right thread! :D): http://www.bladeforums.com/forums/s...oot-and-the-spear-American-and-English-taste?

Great thread by the OP.
I know realize the difference between a Sheeps foot & a Lambs foot if I'm correct. If not please educate me.
Thank you.

Thanks :) Hopefully the pics will make it clear, but I think an important point is that on a Real Lambsfoot the spine and edge are not parallel, like on a Sheepsfoot, rather there is a subtle slope to the spine as it drops down towards the point :thumbsup:
 
Last edited:
I have a confession. I don't own a lambsfoot knife. I'm holding out for the right one, with stag covers, clean and flush joints, and fluted bolsters. Something like this, but with a lambsfoot blade.

Funnily enough Christian, I was thinking of Ken's knife even before I scrolled down to the pics! Some of our members have some superb examples of the Lambsfoot :thumbsup:
 
Last edited:
Here are my four Arthur Wright Lambsfoot knives, in respectively, ebony, buffalo horn, ox horn, and sambar stag.



Great topic for discussion, Jack!

I have admired from afar your lambsfoot knives. So, Friday I ordered one of the ebony Arthur Wright ones. As I have not yet received it, I consider myself a probationary guardian.

Photo to be added when received.

Some lovely lambsfoots (lambsfeet? lambfoots? :eek:) in this thread! :thumbup:

Having had none until recently, I can now proudly say that (largely thanks to Jack's prodding) I now own two. An Arthur Wright in navy blue jigged bone (this one will accompany me to my alma mater in Atlanta, where our school colors are navy blue and old gold):


And because everything's better with a Barlow, I figured the same had to be true for a lambsfoot!



Two of Sheffield's Finest!

(Jack, I'll take a crack at dolling up that graphic when I get back and have a moment to sit down with a photo editor.)

TsarBomba, that is a gorgeous, lambsfoot Barlow. :thumbup:
 
Great topic for discussion, Jack!

I have admired from afar your lambsfoot knives. So, Friday I ordered one of the ebony Arthur Wright ones. As I have not yet received it, I consider myself a probationary guardian.

Photo to be added when received.

Thanks a lot Dean, I hope you get a nice one :) Looking forward to seeing it, and hearing how you find it :thumbsup:
 
Last edited:
So, Friday I ordered one of the ebony Arthur Wright ones. As I have not yet received it, I consider myself a probationary guardian.

Photo to be added when received.

If it's anything like mine, you're going to love it! Just need to spend some time upon arrival flushing it out, then a little more sharpening it, then you'll have a hard time putting it down :)
 
If it's anything like mine, you're going to love it! Just need to spend some time upon arrival flushing it out, then a little more sharpening it, then you'll have a hard time putting it down :)

Thanks for the advice, Mike. That's pretty much what I do with a lot of the knives I get, old and new. I'm also interested how long it will take to get across the pond.
 
Definitely Blake, nice knife :thumbsup:

Hope you get yours quick Dean :thumbsup:
 
Last edited:
Is the blade on the TC Ancient Barlow considered a Lambs foot? Or were they trying to mimic a old over sharpened blade?
 
TsarBomba, that is a gorgeous, lambsfoot Barlow. :thumbup:

Thanks, Dean! FYI I got my lambfoot fairly quickly from the UK (under a week); however you may need to ensure someone is present to sign for it. I requested redelivery but they still wouldn't leave it without an active signature (signing the slip wasn't enough), so the next morning I stopped by my local post office to pick it up.

Some stunning knives on here, especially Tsarbomba's :cool:

Thank you! I think Jack might have some thoughts about the lambfoot vs. sheepsfoot debate. :D

Jack, I whipped this up after finding a previously-posted lambfoot image that closely matched the one in your signature graphic. I hope this is clean enough for you.

 
Back
Top